MAINS POWERED 230V WIRELESS INTERCONNECTION BASE TO SUIT 140 SERIES ONLY
RadioLINK Base for wireless interconnection of 140 Series alarms (EIB141, EIB146, and EIB144)
The EIB168RF RadioLINK Base transmits a Radio Frequency (RF) alarm signal when the smoke/heat alarm mounted on it senses fire. When it receives an RF alarm signal from another EIB168RF Base or RadioLINK device, the attached smoke or heat alarm will sound. It therefore eliminates the need to run long interconnect wires between all the smoke alarms on different floors and in different rooms.
It is designed for use with the Easi-Fit range of Mains Powered Smoke/Heat Alarms. The RadioLINK Base itself is also mains powered and has rechargeable Lithium cells for back-up in the event of mains failure. The RadioLINK Base will normally be wired to the nearest mains circuit in the ceiling (usually the unswitched lighting circuit). The Smoke/Heat Alarm will then slide on to the RadioLINK Base rather than to its normal mounting plate. As many as 30 units can be interconnected in this way.
Complies with AS/NZ 4268:2003