MOTION SENSOR IR 10A C-BUS FLUSH 360O 6M INT WHT


CLI5753L

Passive Infra-red Motion detector, Learn enabled. The sensor incorporates the C-Bus Learn Mode feature. Learn Mode allows the unit to be programmed without the need for a PC connected to the system. Alternatively, the units can be programmed via a PC using the installation software. 360 degree occupancy sensor, flush mount.

Product Attributes

Angle of detection 360 °
Animal zone No
Bus connection included Yes
Bus system KNX No
Bus system KNX radio No
Bus system LON No
Bus system Powernet No
Bus system radio frequent No
Colour White
Creep-under protection Yes
Detection angle horizontal 0 °
Diameter detection range on floor 15 m
Frequency 50
Frequency range [Min] 50 Hz
Material Plastic
Material quality Other
Max. duty cycle 1080 min
Max. transmission range frontally 7.5 m
Max. transmission range sideways 7.5 m
Min. switch-on time 1 s
Model Movement sensor
Mounting method Flush mounted (plaster)
Nominal voltage 250
Number of channels 1
Operation mode switch No
Optimum mounting height 2.4 m
Other bus systems Other
Radio frequent bidirectional No
Rated voltage 15
Response value luminosity adjustable Yes
Response value sensitivity adjustable Yes
Staircase monitoring Yes
Substation input No
Surface protection Other
Switch-off delay self-learning Yes
Teach-function for response value luminosity No
Transparent No
Type of surface Not applicable
UOM Each
Category Bus System
© 2018 John R. Turk  |  Legal  |  Rexel Australia  |  Rexel Global